Me Yasa Ya Kamata A Yi Chamfered na Bututu Kafin A Yi Walda?

Wurin Zafi: Ƙarshen Bututu Mai Yanka Mudu Ba Zai Iya Ɗauki Walda Mai Ƙarfi Ba

Bututun da aka yanke kai tsaye yana barin gefen murabba'i mai faɗi wanda ba zai taɓa haɗa shi da walda ba, wanda ke nufin siririn shiga da kuma haɗin gwiwa wanda zai fi tsagewa a lokacin damuwa. Yanke gefen kusurwa dainjin yin chamfering na ƙarshen bututuyana warware wannan ta hanyar buɗe haɗin don ƙarfen cikawa ya iya ratsa dukkan kauri na bango, yana samar da walda mai ƙarfi da daidaito tun daga farkon wucewa.

Tsarin Ciki da na Waje: Abin da Ake Bukatar Shirya Bututu

Yawancin ayyukan shirya walda suna buƙatar yanke bevel na waje ne kawai a gefen waje na bangon bututun, amma bututun bango mai kauri ko wasu ƙira na haɗin gwiwa suna buƙatar chamber na ciki, don cire burgers da aka bari ta hanyar yankewa da kuma kiyaye kwararar ruwa ta cikin ramin.injin yin famfo na bututuwanda ke sarrafa duka biyun a cikin saiti ɗaya yana adana canjin kayan aiki na biyu akan ayyukan da ke da mahimmanci ga aikin cirewa na ciki kamar bevel na waje.

Hanyoyi Uku Don Rage Bututun Ruwa

Jerin Lambobin Lantarki da aka Sanya

WannanInjin beveling bututu da aka saka id-sakaMaƙallan da ke cikin bututun suna amfani da mandrel mai faɗaɗa wanda ke tsakiya da kuma murabba'i zuwa ga ID, sannan yana niƙa bevel ɗin da injin lantarki. Yana ɗaukar kewayon aiki daga 18mm zuwa 850mm a cikin samfura daban-daban, wanda hakan ya sa ya zama ɗaya daga cikin mafi faɗiinjin yin chamfering na ƙarshen bututujeri don ingantaccen wadatar wutar lantarki a wurin.

Jerin da aka Sanya a ID na Pneumatic

An gina shi akan tsarin hawa mandrel iri ɗaya,injin tsabtace bututun pneumaticYana canza injin lantarki zuwa injin iska, wanda ke aiki akan matsin lamba na 0.6–0.8 MPa. Yana rufe girman girman iri ɗaya da sigar lantarki amma ya dace da wuraren da iska mai matsewa ta fi aminci ko amfani fiye da kebul na wutar lantarki.

Jerin Ciyarwa ta atomatik don Ƙananan Bututu

An gina wannan bututun ne don bututun 32-114mm tare da kauri bango har zuwa 12mm,injin beveling bututun abinci na atomatikYana amfani da tsarin mannewa mai hanyoyi biyu kuma yana ciyar da kayan aikin ta atomatik, yana rage ƙoƙarin mai aiki akan gidajen haɗin ƙananan diamita masu maimaitawa. An yi niyya ne ga wuraren da ba su da isasshen sarari da aikin ƙera su - bututun tashar wutar lantarki, bawul ɗin bututun tukunya, da kuma hanyoyin gina jiragen ruwa inda da yawa daga cikin ƙananan gidajen haɗin gwiwa iri ɗaya ke buƙatar shiri da sauri.

Babban hoto Zane-zanen siga Zane-zane Haɗi
    https://www.bevellingmachines.com/iso-auto-feed-pipe-beveling-machine.html

Kwatanta Musamman

Takamaiman bayanai An saka ID na Wutar Lantarki An saka ID na huhu Ƙaramin Bututun Ciyarwa ta atomatik
Aikin Faɗi 18mm - 850mm 18mm - 850mm 32mm – 114mm
Mafi girman kauri na bango 15–20mm 15–20mm 12mm
Nau'in Tuki Wutar Lantarki, 1.4–2kW Ciwon huhu, 0.6–0.8 MPa Wutar lantarki (motar METABO)
Haɗawa wanda aka sanya a ID, mai mayar da hankali kan kai wanda aka sanya a ID, mai mayar da hankali kan kai Mannewa ta hanyoyi biyu
Mafi Kyau Shafuka masu ƙarfin grid Wuraren da ke da ruwa ko haɗari Ƙaramin bututu, matsewar sarari

Mai ɗauka, Tabbatacce, kuma a shirye don filin

Kowane samfurin a cikin wannan jerin yana dainjin beveling bututu mai ɗaukuwaAn bayar da takardar shaidar CE da ISO 9001, wanda aka gina don amfani a cikin ayyukan man fetur, sinadarai, iskar gas, tashar wutar lantarki, tukunyar jirgi da ayyukan makamashin nukiliya. Zaɓi tsakanin wutar lantarki, iskar gas, ko ciyar da kai ya danganta da samun wutar lantarki a wurin da kuma adadin haɗin da ke da girman da ake buƙata don shiryawa.

Tambayoyin da Ake Yawan Yi

Q1Menene bambanci tsakanin chamfer da bevel?

A: Chamfer ƙaramin yanke ne mai kusurwa, wanda galibi ana amfani da shi don cire gefen kaifi ko burr, yayin da bevel yanki ne mai kusurwa mai faɗi wanda aka tsara musamman don shirya haɗin gwiwa don walda - a cikin shirye-shiryen bututu ana amfani da kalmomin biyu akai-akai a musanya.

Q2Menene matsakaicin diamita na bututun da injin chamfering zai iya ɗauka?

A: Ya dogara da samfurin - jerin lantarki da na iska da aka ɗora da ID a cikin wannan bututun murfin kewayon daga 18mm zuwa 850mm, yayin da ƙananan na'urorin ciyarwa ta atomatik an gina su musamman don ƙananan bututun 32-114mm.

Q3Shin injinan hawa bututu masu ɗaukuwa suna da takardar shaidar CE?

A: Eh, ana samar da samfuran da ke cikin wannan nau'in tare da takardar shaidar CE da ISO 9001, waɗanda suka cika ƙa'idodin siye na yau da kullun don ayyukan mai, sinadarai, tashar wutar lantarki da ayyukan gina jiragen ruwa.

Rubuta saƙonka a nan ka aika mana da shi
Lokacin Saƙo: Agusta-06-2026