GMMA-30T Stationary beveling machine for metal plate
Short Description:
Stationary type beveling machine
Plate thickness 8-80mm
Bevel angel 10-75 degree
Max bevel width could reach 70mm
GMMA-30T Stationary beveling machine for metal plate
Products Introduction
GMMA-30T edge beveling machine is table type specially for Heavy, short and thick metal plates for weld bevel. With wide working range of Clamp thickness 8-80mm, bevel angel 10-75 degree easy adjustable with high efficiency and precious Ra 3.2-6.3.
Specifications
| Model No. | GMMA-30T Heavy plate edge beveling machine |
| Power Supply | AC 380V 50HZ |
| Total Power | 4400W |
| Spindle Speed | 1050r/min |
| Feed Speed | 0-1500mm/min |
| Clamp Thickness | 8-80mm |
| Clamp Width | ＞100mm |
| Process Length | ＞2000mm |
| Bevel angel | 10-75 degree adjustable |
| Single Bevel Width | 10-20mm |
| Bevel Width | 0-70mm |
| Cutter Plate | 80mm |
| Cutter QTY | 6PCS |
| Worktable Height | 850-1000mm |
| Travel Space | 1050*550mm |
| Weight | N.W 780KGS G.W 855KGS |
| Packaging Size | 1000*1250*1750mm |
Note: Standard Machine including 1pc cutter head + 2 set of Inserts + Tools in case + Manual Operation
Fetures
1. Available for metal plate Carbon steel,stainless steel, aluminium etc
2. Can process ”V”,”Y” vary type of bevel joint
3. Milling Type with High Previous can reach Ra 3.2-6.3 for surface
4.Cold Cutting, energy saving and Low Noise, More safe and environmental with OL protection
5. Wide working range with Clamp thickness 8-80mm and bevel angel 10-75 degree adjustable
6. Easy Operation and high efficiency
7. Special design for Heavy duty metal plate
