TMM-80RY Na'urar sarrafa nesa ta ƙarfe mai jujjuyawa don bevel na sama da ƙasa
Takaitaccen Bayani:
Injin beveling na farantin ƙarfe na TMM-80RY tare da ƙira ta musamman wacce za a iya juyawa don duka tsarin beveling na sama da na ƙasa don guje wa rufe takardar ƙarfe. Kauri na farantin 6-80mm, bevel angel digiri 0-60, Faɗin Bevel zai iya kaiwa matsakaicin 70mm ta hanyar kawuna na niƙa na kasuwa da abubuwan da aka saka. Cika buƙatun abokin ciniki gaba ɗaya tare da ƙananan bevel adadin amma beveling na gefe biyu.
TMM-80RY Na'urar sarrafa nesa ta ƙarfe mai jujjuyawa don bevel na sama da ƙasa
Na'urar beveling gefen farantin ƙarfemusamman don yin yanke bevel ko cire lullubi / cire lullubi a kan faranti na ƙarfe kamar ƙarfe mai laushi, bakin ƙarfe, ƙarfe na aluminum, titanium mai ƙarfe, hardox, duplex da sauransu. Ana amfani da shi sosai a masana'antar walda don shirya walda.
 |  |  |
Sigogi don TMM-80RY Na'urar sarrafa nesa ta ƙarfe mai juyawa don bevel na sama da ƙasa
| Samfura | Injin beveling na farantin ƙarfe mai juyawa TMM-80RY |
| Samar da Wutar Lantarki | AC 380V 50HZ |
| Jimlar Ƙarfi | 4920W |
| Gudun Dogon Dogo | 500-1050mm/min |
| Gudun Ciyarwa | 0~1500mm/min |
| Kauri na Matsewa | 6~80mm |
| Faɗin Matsawa | >80mm |
| Tsawon Matsawa | >300mm |
| Mala'ika Bevel | 0~±60 digiri |
| Faɗin Bevel ɗaya | 0-20mm |
| Faɗin Bevel | 0-70mm |
| Diamita na Yankan Yanka | Diamita 80mm |
| An saka ADADI | Kwamfutoci 6 |
| Tsawon Tebur Mai Aiki | 700-760mm |
| Tsawon Teburin Shawara | 730mm |
| Girman Teburin Aiki | 1200*800mm |
| Hanyar Matsewa | Matsewa ta atomatik |
| Girman tayoyi | Inci 4 Mai nauyi |
| Daidaita Tsayin Inji | Kekunan hannu |
| Nauyin Injin N. | 310 kgs |
| Nauyin Injin G | 380 kgs |
| Girman Akwatin Katako | 1100*630*1340mm |
TMM-80RY Na'urar sarrafa nesa ta ƙarfe mai jujjuyawa don bevel na sama da ƙasajerin kayan tattarawa na yau da kullun da akwatunan katako.
Lura: Injinan suna amfani da diamita na kan niƙa na kasuwa mai girman 80mm tare da haƙora 6 da abubuwan da aka saka a injin niƙa.
Fa'idodi ga TMM-80RY Na'urar sarrafa nesa ta ƙarfe mai juyawa don bevel na sama da ƙasa
1) Injin beveling na atomatik zai yi tafiya tare da gefen farantin don yanke bevel
2) Injinan beveling tare da ƙafafun duniya don sauƙin motsawa da ajiya
3) Yankewa a cikin sanyi don guje wa duk wani Layer na oxide ta amfani da kan niƙa da abubuwan da aka saka don samun aiki mai kyau a saman Ra 3.2-6.3. Yana iya yin walda kai tsaye bayan yanke bevel. Abubuwan da aka saka a niƙa sune ƙa'idar kasuwa.
4) Faɗin aiki mai faɗi don kauri na farantin da kuma mala'iku masu daidaitawa.
5) Tsarin musamman tare da saitin ragewa mai aminci.
6) Akwai don nau'in haɗin bevel da yawa da sauƙin aiki.
7) Saurin beveling mai inganci yana kaiwa mita 0.4 ~ 1.2 a minti daya.
8) Tsarin Matsewa ta atomatik da saitin ƙafafun hannu don ƙaramin daidaitawa.
Aikace-aikacedon TMM-80RY Na'urar sarrafa nesa mai juyawa ta ƙarfe mai jujjuyawa don bevel na sama da ƙasa
Ana amfani da injin beveling na faranti sosai a duk masana'antar walda. Kamar
1) Gina Karfe
2) Masana'antar Gina Jiragen Ruwa
3) Tasoshin Matsi
4) Masana'antar walda
5) Injinan Gine-gine da Aikin Ƙarfe
 |  |
 |  |
Aikin farantin aluminum
Sarrafa farantin jan ƙarfe
Aikin Bevel Surface bayan yanke bevel ta hanyar TMM-80R Nesa Control Injin beveling na ƙarfe mai juyawa don sama da ƙasabevel.
Injin gyaran ƙarfe mai ƙarfin TMM-80RY Mai sarrafawa daga nesatare da cikakken aiki da ake samu don duka bevel na sama da na ƙasa. Idan abokin ciniki yana da ƙaramin adadin farantin beveling amma yana buƙatar beveling na gefe biyu. Injin beveling na farantin GMMA-80R zai zama mafi kyawun zaɓi.
Hakanan kyakkyawan zaɓi ne don yin aiki musamman don bevel na ƙasa, Maganin yau da kullun kamar yadda ke ƙasa:
1)TMM-80AY farantin karfe bevelerdon saman bevel,TMM-80RY farantin bevelerdon bevel na ƙasa (faɗin bevel na sama mafi girman 70mm)
2)TMM-100LY farantin karfe bevelerdon saman bevel, TMM-80RY farantin bevelerdon bevel na ƙasa (faɗin bevel na sama mafi girma 100mm)
 |
Takaddun shaida & Nunin
