Injin ciyar da motoci na GMMA-60L mai amfani da wutar lantarki 0-90 digiri
Takaitaccen Bayani:
Injin niƙa na GMMA na gefen farantin beveling yana ba da inganci mai kyau da aiki mai kyau akan aikin bevel da haɗin gwiwa. Tare da kewayon aiki mai faɗi na kauri farantin 4-100mm, digiri 0-90 na bevel angel, da injinan da aka keɓance don zaɓi. Fa'idodin ƙarancin farashi, ƙarancin hayaniya da inganci mafi girma.
GMMA-60L ciyar da motainjin juyawadigiri 0-90
Gabatarwar Samfura
GMMA-60L ciyar da motainjin juyawatare da kewayon aiki na kauri na 6-60mm, bevel angel mai daidaitawa digiri 0-90 akan gefen farantin ƙarfe mai lanƙwasa da niƙa don shirya walda. Tare da fa'idodin babban gudu da saman kammalawa mai girma Ra 3.2-6.3, sarrafawa mai sauƙi da daidaitawa akan kewayon aiki mai faɗi. Inji ɗaya zai iya ɗaukar yawancin buƙatun bevel.
Akwai hanyoyi guda biyu na sarrafawa:
Samfuri na 1: Mai yankewa ya kama ƙarfe da gubar a cikin injin don kammala aikin yayin sarrafa ƙananan faranti na ƙarfe.
Samfuri na 2: Injin zai yi tafiya a gefen ƙarfe kuma ya kammala aiki yayin sarrafa manyan faranti na ƙarfe.
Bayani dalla-dalla
| Lambar Samfura | Injin ciyar da abinci na GMMA-60L na atomatik |
| Tushen wutan lantarki | AC 380V 50HZ |
| Jimlar Ƙarfi | 3400W |
| Gudun Dogon Dogo | 1050r/min |
| Gudun Ciyarwa | 0-1500mm/min |
| Kauri na Matsewa | 6-60mm |
| Faɗin Matsawa | −80mm |
| Tsawon Tsarin Aiki | −300mm |
| Mala'ika mai kama da Bevel | Ana iya daidaita digiri 0-90 |
| Faɗin Bevel Guda Ɗaya | 10-20mm |
| Faɗin Bevel | 0-55mm |
| Farantin Yankan | 63mm |
| Yankewa ADADIN | Kwamfuta 5 |
| Tsawon Tebur Mai Aiki | 700-760mm |
| Sararin Tafiya | 800*800mm |
| Nauyi | NW 195KGS GW 235KGS |
| Girman Marufi | 800*690*1140mm |
Lura: Injin da aka saba amfani da shi wanda ya haɗa da kan yanka guda 1 + saitin abubuwan sakawa guda 2 + Kayan aiki a cikin akwati + Aikin hannu
Siffofi
1. Akwai don farantin ƙarfe. Karfe mai carbon, bakin ƙarfe, aluminum da sauransu.
2. Zai iya sarrafa nau'in haɗin bevel na "V", "Y", "U", "J" a tsaye da kwance
3. Nau'in niƙa mai babban abin da ya gabata zai iya kaiwa Ra 3.2-6.3 don saman
4. Yankewa Mai Sanyi, Ajiye Makamashi da Ƙarancin Hayaniya, Mafi aminci da muhalli
5. Faɗin aiki mai faɗi tare da kauri mai ɗaurewa 6-60mm da kuma ma'aunin digiri na bevel 0-90 wanda za'a iya daidaitawa
6. Sauƙin Aiki da kuma ingantaccen aiki
Bevel Surface 
Aikace-aikace
Ana amfani da shi sosai a fannin samar da iskar gas, masana'antar man fetur, jirgin ruwa mai matsin lamba, gina jiragen ruwa, sarrafa ƙarfe da sauke kaya a fannin masana'antar walda.
Nunin Baje Kolin
Marufi
