GMMA-60U farantin beveling inji for kasa bevel
Takaitaccen Bayani:
GMMA-60U farantin beveling inji for karfe takardar beveling / milling / chamfering / clad cire.
An tsara shi musamman don bevel na ƙasa.Yin aiki don kauri na faranti 6-60mm, mala'ikan bevel 0-60 digiri, da max bevel nisa zai iya kaiwa 60mm.
GMMA-60U farantin beveling injidon bevel na kasa
Metal farantin gefen beveling milling injiyafi yi bevel sabon ko clad kau / sanye take tsiri / baki chamfering a kan karfe faranti abu kamar m karfe, bakin karfe, aluminum karfe, gami titanium, hardox, duplex etc.It ne yadu amfani da waldi masana'antu for waldi preperation.
GMMA-60U bevleing injitsara musamman don bevel na kasa.Akwai don farantin kauri 6-60mm, bevel mala'ika 0-60 digiri e da max bevel nisa 60mm.Musamman don aiwatar da haɗin gwiwa na bevel V/Y don riga-kafin walda.
Ma'auni don na'urar beveling farantin GMMA-60U don bevel na kasa
| Samfura | GMMA-60U farantin beveling inji |
| Suppy Power | AC 380V 50HZ |
| Jimlar Ƙarfin | 4520W |
| Gudun Spindle | 1050r/min |
| Gudun Ciyarwa | 0 ~ 1500mm/min |
| Tauri Kauri | 6 ~ 60mm |
| Matsa Nisa | > 80mm |
| Tsawon Manne | > 300mm |
| Bevel Angel | 0 ~ 60 digiri |
| Singel Bevel nisa | 0-20mm |
| Bevel Nisa | 0-60mm |
| Diamita Cutter | Domin 63mm |
| Saka QTY | 6 guda |
| Tsayin Aiki | 700-760 mm |
| Shawarwari Tsayin Tebur | mm 730 |
| Girman Kayan Aiki | 800*800mm |
| Hanyar Matsala | Matsawa ta atomatik |
| Girman Dabarun | 4 inch STD |
| Daidaita Tsayin Inji | Na'ura mai aiki da karfin ruwa |
| Machine N. Weight | 225 kg |
| Nauyin G Machine | 260 kg |
| Girman Harka na katako | 950*700*1230mm |
GMMA-60U farantin beveling inji for kasa beveldaidaitaccen lissafin shiryawa da marufi na katako
Lura:GMMA-60U beveling injita amfani da daidaitattun shugabannin milling diamita 63mm da niƙa abun da ake sakawa musamman don bevel na ƙasa
Abũbuwan amfãni ga GMMA-60U farantin beveling inji ga kasa bevel
1) Na'ura mai sarrafa motsi ta atomatik zai yi tafiya tare da gefen farantin don yankan bevel
2) Injin beveling tare da ƙafafun duniya don sauƙin motsi da ajiya
3) Sanyi yankan zuwa aovid kowane oxide Layer ta amfani da milling shugaban da abun da ake sakawa ga mafi girma yi a kan surface Ra 3.2-6.3 .Yana iya yin walda kai tsaye bayan yankan bevel.Abubuwan da ake saka niƙa sune daidaitattun kasuwa.
4) Wide aiki kewayon for farantin clamping kauri da bevel mala'iku daidaitacce.
5) Tsari na musamman tare da saitin ragewa don ƙarin aminci.
6) Akwai don nau'in haɗin gwiwa da yawa da aiki mai sauƙi.
7) Babban inganci beveling gudun isa 0.4 ~ 1.2 mita da min.
8) Tsarin ƙwanƙwasa ta atomatik da saitin dabaran hannu don daidaitawa kaɗan.
Aikace-aikace donGMMA-60U farantin beveling inji for kasa bevel
Injin beveling plateana amfani da su sosai don duk masana'antar walda.Kamar
1) Gina Karfe 2) Masana'antar Gina Jiragen Ruwa 3) Ruwan Matsi 4) Kera Welding.
5) Injinan Gina & Karfe
GMMA-60Ufarantin beveling inji na kasa bevel tsara musamman don kasa bevel.Abokin ciniki kullum zai ɗauki ƙasa bayani.
1) GMMA-60U beveling injidon bevel na kasa,GMMA-60L injin bevelingdon saman bevel
2)GMMA-60U beveling injidon bevel na kasa,GMMA-80A beveling injidon saman bevel
3)GMMA-60U beveling injidon bevel na kasa,GMMA-100L injin bevelingdon saman bevel
