Na'urar Face Face ta ID vs OD da aka Sanya: Yadda Ake Zaɓar Face Face Mai Ɗauke da Flange Mai Kyau

Zaɓar damainjin fuskantar flangeyana da matuƙar muhimmanci wajen kiyaye hanyoyin sadarwa marasa zubewa a masana'antun mai, sinadarai, iskar gas, da makamashin nukiliya. Fahimtar bambance-bambance tsakanin tsarin da aka ɗora da ID da OD yana taimaka wa ƙungiyoyin gyara su zaɓi kayan aiki mafi kyau don takamaiman yanayin filin aikinsu.

Tsarin Mannewa na Ciki da aka Sanya a ID

Hukumar Abinci da Aikin Gona ta Duniya (WFP-1000)mai ɗaukar hoto mai ɗaukar hotoyana wakiltar hanyar da aka ɗora ID, yana mannewa a cikin bututu ko ramin flange don samun daidaito mafi girma. Wannan tsarin da ke amfani da iska yana ɗaukar fuskoki daga diamita na 50mm zuwa 1000mm tare da kewayon hawa na 50-508mm. Tsarin sassa uku na zamani yana da tallafin manne guda huɗu, ciyarwar axial da radial ta atomatik, da juyawar mai riƙe kayan aiki na digiri 360. Tare da saurin juyawa daga 0-42 r/min da kuma kusurwar juyawa na digiri ± 30, wannanna'ura mai fuskantar flange a shafin yanar gizoYana sarrafa labule mai faɗi, rufin ruwa, ci gaba da lanƙwasa, da ramukan RTJ akan ƙarfen siminti, ƙarfe mai tsari na ƙarfe, da flanges na bakin ƙarfe.

WFP-1000 An saka ID-Akan	Kewayon 50-1000mm, na numfashi, 0-42 r/min		https://www.bevellingmachines.com/high-efficiency-internal-rtj-grooves-pneumatic-portable-flange-facing-machine-wfp-1000.html

Maganin da aka Sanya a ID mai Girma

Ga manyan flanges, WFS-2000 yana faɗaɗa ƙarfin da aka ɗora ta ID zuwa kewayon fuska na 2000mm tare da kewayon hawa 604-1830mm.injin fuskantar flangeYana kula da irin wannan ƙirar mai kama da na'urar servo ta lantarki, ta iska, ko kuma ta hydraulic. Saurin ciyar da kayan aiki na 102mm da kuma saurin juyawa na 0-22 r/min yana ba da damar yin aiki mai inganci na ramukan hatimi, shirya walda, da ayyukan hana gajiya. Duk samfuran da aka ɗora da ID suna da ƙananan tsare-tsare tare da tsarin birki na farko don yankewa lokaci-lokaci da sassaucin alkibla mara iyaka.

WFS-2000 An saka ID-Akan	Kewayon 762-2000mm, servo/hydraulic, 0-22 r/min		https://www.bevellingmachines.com/wfp-flange-facing-machine-wfp-2000.html

Tsarin Mannewa na Waje da aka Sanya a OD

Idan matsewa ta ciki ba ta da amfani, tsarin da aka ɗora da OD yana ba da madadin da ya dace. Jerin TFP-Omai ɗaukar hoto mai ɗaukar hotoyana mannewa a kan diamita na waje ta amfani da ƙafafu da muƙamuƙi masu daidaitawa da sauri. An ɗora wannan a waje.na'ura mai fuskantar flange a shafin yanar gizoYana amfani da injinan iska masu amfani da bel tare da sukurori masu daidaito da jagorar layin dogo don samun sakamako mai santsi da maimaitawa. Tsarin ciyar da mahaɗin yana juyawa zuwa kowane kusurwa daga tsaye, yana ba da sassauci don ƙera saman gasket daban-daban ciki har da gamawa na kayan aiki, gamawa mai santsi, gamawa na gramophone, da ramukan RTJ.

Jerin TFP-O An saka OD	0-3000mm kewayon, pneumatic, ciyar da sukurori ball		https://www.bevellingmachines.com/high-efficiency-od-mounted-portable-china-flange-facing-machine-grooves-for-rtj-flange-facer.html

Kwatanta Injin Fuskantar Flange

Zaɓar tsakanin ID da aka ɗora da ODinjin fuskantar flangeTsarin ya dogara ne akan tsarin flange, samun dama, da buƙatun aikace-aikace.mai ɗaukar hoto mai ɗaukar hotoNa'urori sun yi fice a wurare masu tsauri tare da kwanciyar hankali na ciki, yayin da aka ɗora ODna'ura mai fuskantar flange a shafin yanar gizoTsarin yana ba da damar yin amfani da abubuwa daban-daban idan aka iyakance damar shiga cikin gida. Duk tsarin suna ba da daidaitattun kammala saman don aikace-aikacen rufewa mai mahimmanci a cikin masana'antar mai, sinadarai, da wutar lantarki.

Tambayoyin da Ake Yawan Yi

T1: Menene bambanci tsakanin injunan da aka ɗora da ID da kuma injinan da aka ɗora da OD?A: Injinan da aka ɗora da ID suna mannewa a cikin bututun don kwanciyar hankali, yayin da tsarin da aka ɗora da OD suna mannewa a kan diamita na waje lokacin da shigarwar ciki ba ta da amfani.

Q2: Waɗanne saman flange za a iya amfani da injin gyaran flange mai ɗaukuwa?A: Injin zamani na gyaran flange, layukan ruwa, ramukan RF, ramukan RTJ, layukan rufewa masu karkace, da layukan rufewa masu kauri.

Q3: Waɗanne kayan da injinan da ke fuskantar flange za su iya sarrafawa?A: Waɗannan injunan suna amfani da ƙarfen siminti, ƙarfe mai tsari, bakin ƙarfe, da sauran kayan flange na ƙarfe.

Q4: Menene matsakaicin diamita na flange da waɗannan injunan za su iya ɗauka?A: Samfuran da aka ɗora da ID suna iya jurewa har zuwa 2000mm (WFS-2000), yayin da tsarin da aka ɗora da OD ya miƙe har zuwa kewayon fuska 3000mm.

Q5: Waɗanne zaɓuɓɓukan tuƙi ne ake da su don injunan fuskantar flange a wurin?A: Zaɓuɓɓukan tuƙi sun haɗa da tsarin pneumatic, servo electric, da hydraulic don dacewa da yanayin wurin da wadatar wutar lantarki.