TMM-100Lfarantimai juyawainjinya zama babban kayan aiki a masana'antar jiragen ruwa masu matsin lamba, yana nuna sauƙin amfani da ingancinsa a aikace-aikace daban-daban. An ƙera shi musamman don biyan buƙatun da ake buƙata na niƙa farantin, wannan injin niƙa mai ci gaba shine zaɓi mafi dacewa ga masu kera jiragen ruwa masu matsin lamba.
Ɗaya daga cikin manyan aikace-aikacen TMM-100Linjin juyawayana da nufin gyara faranti na ƙarfe kafin walda. A masana'antar matsi, daidaito yana da matuƙar muhimmanci, domin duk wani lahani na iya haifar da mummunan gazawa. GMMA-100L yana tabbatar da cewa an niƙa faranti na ƙarfe zuwa ma'aunin da ya dace, wanda ke haifar da santsi, saman da ya dace da kuma ingantaccen ingancin walda. Wannan ƙarfin ba wai kawai yana ƙara ingancin tsarin jirgin ba ne, har ma yana rage yuwuwar lahani bayan walda.
Wani muhimmin amfani kuma shine ƙera nau'ikan geometry masu rikitarwa da ake buƙata don sassan tasoshin matsin lamba. GMMA-100L an sanye shi da fasahar niƙa mai zurfi, wanda ke ba da damar yin gyare-gyare masu inganci na siffofi masu rikitarwa. Wannan yana da fa'ida musamman ga masana'antun da ke buƙatar keɓance tasoshin matsin lamba don biyan takamaiman buƙatun masana'antu, kamar waɗanda ake amfani da su a masana'antar mai da iskar gas, sinadarai, da samar da wutar lantarki.
Gabatarwar Shari'a
Babban masana'antar tukunyar ruwa mai matsin lamba tana buƙatar sarrafa faranti na bakin ƙarfe mai kauri 40mm.
Dangane da buƙatar abokin ciniki, bisa ga ƙwarewar masana'antu, muna ba da shawarar abokin ciniki ya zaɓi Taole TMM-100Lfarantin ƙarfemai juyawainjin.
Sigar Samfurin
| Ƙarfin wutar lantarki | AC380V 50HZ |
| Jimlar ƙarfi | 6520W |
| Yanke amfani da makamashi | 6400W |
| Gudun dogara | 500~1050r/min |
| Yawan ciyarwa | 0-1500mm/min (ya bambanta dangane da kayan aiki da zurfin ciyarwa) |
| Kauri farantin matsewa | 8-100mm |
| Faɗin farantin matsewa | ≥ 100mm (ba a haɗa shi da injin ba) |
| Tsawon allon sarrafawa | − 300mm |
| Kusurwar Bevel | 0 °~90 ° Mai daidaitawa |
| Faɗin bevel ɗaya | 0-30mm (ya danganta da kusurwar bevel da canje-canjen kayan) |
| Faɗin bevel | 0-100mm (ya bambanta dangane da kusurwar bevel) |
| Diamita na Shugaban Yankan | 100mm |
| Adadin ruwan wukake | Guda 7/9 |
| Nauyi | 440kg |
A wurin, akwai manyan faranti masu dogayen bevels, faranti na bakin karfe mai kauri mm 40, rabi an yi su, tare da kusurwar digiri 30 da kuma bevels mai zurfin mm 20.
Saita gudun zuwa 400mm/minti sannan a kammala shi da yanka ɗaya. Tsarin yana buƙatar bevel mai siffar X. Bayan an juya allon, sai a sake yanke shi a hankali.
Domin biyan buƙatun da ƙa'idodi na aiki a wurin, saboda yawan aikin da ake yi, ana buƙatar injunan niƙa mai ƙarfi guda 4 na TMM-100L don sarrafawa a lokaci guda. Abokin ciniki ya sanya ƙarin odar kayan aiki a wurin kuma ya sanya hannu kan shirin haɗin gwiwa na dogon lokaci!
Lokacin Saƙo: Janairu-05-2026