GMMA-60S Plate Edge beveler
Nkọwa dị mkpirikpi:
GMMA-60S efere onu beveler bụ ụdị akpaaka eduzi beveling igwe tinyere efere maka efere ọnụ egwe ọka, chamfering, clad mwepụ megide ịgbado ọkụ preperation.Dị maka nkwonkwo bevel ụdị V/Y na igwe nri kwụ ọtọ na ogo 0.GMMA-60S maka efere ọkpụrụkpụ 6-60mm, bevel angel 0-60 ogo na max bevel obosara nwere ike iru 45mm.
GMMA-60SEfereọnụ beveler
Igwe igwe na-egwepịa efere efere n'akụkụ beveling igwetumadi ime bevel ọnwụ ma ọ bụ clad mwepụ / clad stripping / onu chamfering na ígwè efere ihe dị ka nwayọọ ígwè, igwe anaghị agba nchara, aluminum ígwè, alloy titanium, hardox, duplex etc.It na ọtụtụ-eji maka ịgbado ọkụ ụlọ ọrụ maka ịgbado ọkụ preperation.
GMMA-60Sefere eferebevelerbụ isi na aku na uba nlereanya maka efere ọkpụrụkpụ 6-60mm, bevel angel 0-60 ogo.tumadi maka bevel nkwonkwo V/Y ụdị na vetikal igwe nri na 0 ogo.Iji Market ọkọlọtọ-egwe ọka isi dayameta 63mm na miling inserts.
Obosara bevel nwere ike iru 45mm maka nha bevel bụ isi megide ịgbado ọkụ.
Bevel Joint na Bevel Size ntụaka maka ihu efere GMMA-60Sbeveler
 |  |
Oke maka GMMA-60S efere onu beveler
| Ụdị | GMMA-60Sefere efere |
| Ike Suppy | AC 380V 50HZ |
| Mkpokọta ike | 4520W |
| Ọsọ Spindle | 1050r/min |
| Ọsọ nri | 0 ~ 1500mm / nkeji |
| Mgbochi Ọkpụrụkpụ | 6-60mm |
| Ogologo Mgbochi | > 80mm |
| Ogologo njigide | > 300mm |
| Bevel Angel | 0 ~ 60 ogo |
| obosara Singel Bevel | 0-20mm |
| Obosara Bevel | 0-45mm |
| Dayameta Cutter | Ogologo ya bụ 63 mm |
| Ntinye QTY | 6 pcs |
| Elu arụ ọrụ | 700-760 mm |
| Na-atụ aro Tebụl Elu | 730 mm |
| Nha arụ ọrụ | 800*800mm |
| Ụzọ mmachi | Mkpọchi akpaaka |
| Nha Wheel | 4 inch STD |
| Gbanwee ịdị elu igwe | Hydraulic |
| Igwe N. Ibu | 200 n'arọ |
| Igwe G Arọ | 255 n'arọ |
| Nha Mpempe osisi | 800*690*1140mm |
GMMA-60S efere onu bevelerọkọlọtọ packinglist na osisi ikpe nkwakọ.
Mara: GMMA-60S efere beveler na-eji ahịa stadard-egwe ọka isi dayameta 63mm wtih 6 ezé na ntinye igwe ihe.
 |  |
Uru maka GMMA-60S efere onuigwe beveler
1) Igwe eji akwa akwa na-eje ije na-akpaghị aka ga-eje ije na nsọtụ efere maka ịkpụ bevel
2) Igwe beveling nwere wiil zuru ụwa ọnụ maka ịkwaga na nchekwa dị mfe
3) Mbelata oyi na-aovid oyi akwa ọ bụla oxide site na iji isi igwe igwe na ntinye maka ịrụ ọrụ dị elu n'elu Ra 3.2-6.3.Ọ nwere ike ime ịgbado ọkụ ozugbo mgbe bevel gachara.Ntinye igwe nri bụ ọkọlọtọ ahịa.
4) Ogologo na-arụ ọrụ dị ukwuu maka ịkpụchi efere efere na ndị mmụọ ozi bevel nwere ike ịgbanwe.
5) Pụrụ iche imewe na reducer ntọala behand ọzọ mma.
6) Dị maka multi bevel nkwonkwo ụdị na mfe ọrụ.
7) High arụmọrụ beveling ọsọ iru 0.4 ~ 1.2 mita kwa min.
8) Sistemụ njigide akpaaka na ntọala wiil aka maka ntakịrị mmezi.
Ngwa maka GMMA-60S efere eti beveler igwe
A na-etinye igwe beveling efere maka ụlọ ọrụ ịgbado ọkụ niile.Dị ka
1) Nrụpụta ígwè 2) Ụlọ ọrụ na-arụ ụgbọ mmiri 3) Ụgbọ mmiri nrụgide 4) Ịmepụta Welding.
5) Machinery & Metallurgy
Foto arụmọrụ saịtị maka ntụnye aka site na GMMA-60S plate Edge beveler
GMMA-60S bụ karịsịa maka obere efere ma ọ bụ obere ọkpụrụkpụ efere n'elu bevel.Ndị ahịa ga-eche nhọrọ na-eche ihuGMMA-60S efere bevelernaGMMA-60L efere beveler.
1)GMMA-60Smaka 6-60mm, bevel mmụọ ozi 0-60 ogo, Max bevel obosara 45mm
2) GMMA-60Lmaka 6-60mm, bevel mmụọ ozi 0-90 ogo, Max bevel obosara 60mm
Isi dị iche iche:Igwe beveling GMMA-60Lspindle mgbanwe iji nweta nnukwu bevel obosara n'ihi 0-90 ogo, Dị ka ịgbanwe isi maka U / J bevel na 90 ogo egwe ọka maka mgbanwe bevel (L ụdị bevel)
 |  |
