Injin Sarrafa Injin Siyar da Injin 10 Mai Laminated Tempered Glass Mai Layi ...
Takaitaccen Bayani:
Injin beveling na farantin ƙarfe tare da zaɓi mai juyawa don tsarin beveling na gefe biyu.. Rage sanyi tare da babban inganci, aminci, aiki mai sauƙi da kewayon aiki mai faɗi don biyan yawancin buƙatun bevel.
Muna dagewa kan ƙa'idar haɓaka 'Inganci mai kyau, Aiki, Gaskiya da Tsarin Aiki Mai Sauƙi' don samar muku da kyakkyawan taimako na sarrafawa don Gilashin Mai Zane na Masana'anta na Siyar da Gilashin Motoci 10 Masu LaminatedLayin Madaidaiciya Mai Layi Mai Sauƙi Injin SarrafawaBarka da zuwa ziyartar kamfaninmu da masana'antarmu. Tabbatar kun ji daɗin tuntuɓar mu idan kuna buƙatar ƙarin taimako.
Muna dagewa kan ƙa'idar haɓaka 'Inganci mai kyau, Aiki, Gaskiya da Tsarin Aiki Mai Sauƙi' don samar muku da ingantaccen taimako na sarrafawa donGilashin Laminated Mai Zafi, Injin Sarrafawa, Layin Madaidaiciya Mai Layi Mai SauƙiAn gabatar da mu a matsayin ɗaya daga cikin masu samar da kayayyaki da kuma fitar da kayayyakinmu zuwa ƙasashen waje. Muna da ƙungiyar ƙwararru masu ƙwarewa waɗanda ke kula da inganci da wadata a kan lokaci. Idan kuna neman Inganci Mai Kyau akan farashi mai kyau da kuma isarwa akan lokaci, tuntuɓi mu.
Injin yanke bevel na gefe biyu na GBM-16D-R
Gabatarwa
Injin yanke bevel mai gefe biyu na GBM-16D-R ana amfani da shi sosai a masana'antar gini don shirya walda tare da zaɓin juyawa don beveling na gefe biyu. Kauri mai ɗaurewa shine digiri 9-40 da kewayon mala'ika mai kusurwa 25-45 tare da babban inganci a sarrafa mita 1.2-1.6 a minti ɗaya. Matsakaicin faɗin Bevel zai iya kaiwa 28mm musamman don faranti masu nauyi.
Akwai hanyoyi guda biyu na sarrafawa:
Samfuri na 1: Mai yankewa ya kama ƙarfe da gubar cikin injin don kammala aikin yayin sarrafa ƙananan faranti na ƙarfe.
Module 2: Injin zai yi tafiya tare da gefen ƙarfe kuma ya kammala aikin yayin sarrafa manyan faranti na ƙarfe.
Bayani dalla-dalla
| Lambar Samfura. | Injin yanke bevel mai gefe biyu na GBM-16D-R |
| Tushen wutan lantarki | AC 380V 50HZ |
| Jimlar Ƙarfi | 1500W |
| Gudun Mota | 1450r/min |
| Gudun Ciyarwa | Mita 1.2-1.6/min |
| Kauri na Matsewa | 9-40mm |
| Faɗin Matsawa | −115mm |
| Tsawon Tsarin Aiki | −100mm |
| Mala'ika Bevel | Digiri na 25-45 kamar yadda abokin ciniki ke buƙata |
| Faɗin Bevel Guda Ɗaya | 16mm |
| Faɗin Bevel | 0-28mm |
| Farantin Yankan | φ 115mm |
| Yankewa ADADIN | Kwamfuta 1 |
| Tsawon Tebur Mai Aiki | 700mm |
| Sararin bene | 800*800mm |
| Nauyi | NW 212KGS GW 365KGS |
| Nauyi don zaɓin Juyawa GBM-16D-R | NW 315KGS GW 360KGS |
Lura: Injin yau da kullun wanda ya haɗa da guda 3 na kayan yanka + Kayan aiki idan akwai + Aikin hannu
Siffofi
1. Akwai don kayan ƙarfe: ƙarfe na carbon, bakin ƙarfe, aluminum da sauransu
2. Injin IE3 na yau da kullun a 1500W
3. Ingantaccen aiki zai iya kaiwa mita 1.2-1.6/min
4. Akwatin rage kayan ragewa da aka shigo da shi don yanke sanyi da rashin iskar shaka
5. Babu fashewar ƙarfe, mafi aminci
6. Matsakaicin faɗin bevel zai iya kaiwa 28mm
7. Sauƙin aiki kuma mai juyi don sarrafa bevel na gefe biyu.
Bevel Surface
Aikace-aikace
Ana amfani da shi sosai a fannin samar da iskar gas, masana'antar man fetur, jirgin ruwa mai matsin lamba, gina jiragen ruwa, sarrafa ƙarfe da sauke kaya a fannin masana'antar walda.
Nunin Baje Kolin
Marufi
