Wani kamfani mai ƙarfi (China) Co., Ltd. ƙwararre ne wanda ke samarwa da kuma samar da tsarin ƙarfe na ƙasashen duniya. Ana amfani da kayayyakin da ake samarwa a dandamalin mai na ƙasashen waje, tashoshin wutar lantarki, masana'antu, gine-gine masu tsayi, kayan jigilar ma'adinai, da sauran kayan aikin injiniya.
Akwai girman allo daban-daban da buƙatun sarrafawa a kusurwoyi daban-daban a wurin. Bayan cikakken nazari, muna ba da shawarar amfani da TMM-80Rna'urar niƙa gefen+TMM-20Tfaranti mai faɗiinjindon sarrafawa.
Ana iya sake amfani da TMM-80Rƙarfe farantin bevelinginjinAna iya sarrafa tsagi na V/Y, tsagi na X/K, da ayyukan niƙa gefen plasma na bakin ƙarfe.
Halaye
l Rage farashin amfani,
l Rage ƙarfin aiki a ayyukan yanke sanyi,
l Fuskar bevel ɗin ba ta da iskar shaka, kuma santsi na saman gangara ya kai Ra3.2-6.3
l Wannan samfurin yana da inganci kuma mai sauƙin aiki
Sigogin Samfura
| Samfurin samfurin | TMM-80R | Tsawon farantin sarrafawa | −300mm |
| Tushen wutan lantarki | AC 380V 50HZ | Kusurwar Bevel | 0°~±60° Ana iya daidaitawa |
| Jimlar ƙarfi | 4800W | Faɗin bevel ɗaya | 0~20mm |
| Gudun dogara | 750~1050r/min | Faɗin Bevel | 0~70mm |
| Yawan ciyarwa | 0~1500mm/min | Diamita na ruwa | φ80mm |
| Kauri na farantin clamping | 6~80mm | Adadin ruwan wukake | kwamfuta |
| Faɗin farantin matsewa | >100mm | Tsayin benci na aiki | 700*760mm |
| Cikakken nauyi | 385kg | Girman fakitin | 1200*750*1300mm |
Fasaha ta kwamfutar hannu
Girman allon sarrafawa:
kauri 6mm-80mm (mafi ƙarancin iyaka 4mm)
Tsarin aiki na tsagi:
0~± 60 digiri, kusurwar da za a iya daidaitawa idan aka so
Tsarin faɗaɗa/zurfin gangara:
matsakaicin 20mm a kowace aiki
Matsakaicin faɗin gangara sau da yawa:
70mm
Santsi a saman aiki:
Ra: 3.2~6.3
Injin niƙa gefen TMM-20T, galibi ana amfani da shi don sarrafa ƙananan faranti.
Sigogi na fasaha na injin ƙaramin farantin TMM-20T
atomatik ƙaramin farantin beveling inji:
| Tushen Wutar Lantarki: AC380V 50HZ (ana iya gyara shi) | Jimlar ƙarfi: 1620W |
| Faɗin allon sarrafawa:> 10mm | kusurwar bevel: digiri 30 zuwa digiri 60 (ana iya keɓance wasu kusurwoyi) |
| Kauri na farantin sarrafawa: 2-30mm (kauri mai daidaitawa 60mm) | Gudun mota: 1450r/min |
| Matsakaicin faɗin bevel: 15mm | Ma'aunin aiwatarwa: CE, ISO9001:2008 |
| Yawan ciyarwa: 0-1600mm/min | Nauyin da aka saba: 135kg |
Kayan aiki sun isa wurin sarrafawa, shigarwa da gyara kurakurai:
Ana amfani da injin niƙa gefen TMM-80R galibi don yin chamfering matsakaici mai kauri da manyan faranti.
An ƙera injin niƙa tebur na TMM-20T don sarrafa ƙananan kayan aiki masu kauri na 3-30mm, kamar haƙarƙari masu ƙarfafawa, faranti masu kusurwa uku, da faranti masu kusurwa.
Nunin tasirin sarrafawa:
Bayan an sarrafa, samfurin da aka gama ya cika buƙatun aikin kuma ana isar da shi cikin sauƙi!
Lokacin Saƙo: Janairu-21-2026