GBM-16D mosebetsi o boima tšepe poleiti beveling mochini
Tlhaloso e Khutšoanyane:
Mochini oa ho roala tšepe oa GBM oa tšepe o nang le mefuta e mengata e fapaneng e sebetsang ea litlhaloso tsa poleiti.Fana ka boleng bo phahameng, katleho, ts'ebetso e bolokehileng le e bonolo mabapi le ho lokisa weld.
GBM-16D tšepe e boimamochini o hlatsoang lijana
Selelekela
GBM-16D matla a phahameng a tšepe poleiti beveling mochine o sebelisoang haholo indastering ea kaho bakeng sa weld preparation.Clamp botenya 9-40mm le bevel angel range 25-45degree e fetolehang ka katleho e phahameng ha ho sebetsoa 1.2-1.6 metres ka min.Bophara ba bevel e le 'ngoe bo ka fihla ho 16mm ka ho khetheha bakeng sa lipoleiti tsa tšepe tse boima.
Ho na le mekhoa e 'meli ea ho sebetsa:
Mohlala oa 1: Sehahi se tšoara tšepe ebe se isa mochining ho phethela mosebetsi ha se ntse se lokisa lipoleiti tse nyane tsa tšepe.
Mokhoa oa 2: Mochini o tla tsamaea moeling oa tšepe ebe o phethela mosebetsi ha o ntse o lokisa lipoleiti tse kholo tsa tšepe.
Litlhaloso
| Mohlala NO. | GBM-16D tšepe poleiti beveling mochini |
| Phepelo ea motlakase | AC 380V 50HZ |
| Kakaretso ea Matla | 1500W |
| Lebelo la makoloi | 1450r/min |
| Fepa Lebelo | 1.2-1.6 metres/min |
| Botenya ba Clamp | 9-40 limilimithara |
| Bophara ba Clamp | ≥115 limilimithara |
| Bolelele ba Ts'ebetso | ＞100mm |
| Bevel Angel | 25-45 degree joalo ka tlhokahalo ea moreki |
| Bophara ba Bevel e le 'Ngoe | 16 limilimithara |
| Bevel Width | 0-28mm |
| Sekhahla Plate | φ 115mm |
| Sekhahla QTY | 1pc |
| Worktable Height | 700 limilimithara |
| Sebaka sa fatše | 800*800mm |
| Boima ba 'mele | NW 212KGS GW 265KGS |
| Boima bakeng sa Turnable optionGBM-12D-R | NW 315KGS GW 360KGS |
Tlhokomeliso: Mochini o Tloaelehileng o kenyelletsang 3pcs ea li-cutter + Tools haeba ho ka etsahala + Ts'ebetso ea Manual
Fetures
1. E fumaneha bakeng sa thepa ea tšepe: tšepe ea carbon, tšepe e sa hloekang, aluminium joalo-joalo
2. IE3 Enjene e tloaelehileng ho 1500W
3. Phahameng ka ho Fetisisa e ka fihla ho 1.2-1.6meter / min
4. Lebokose la lisebelisoa tsa ho fokotsa tse kentsoeng bakeng sa ho itšeha ho batang le ho se na oxidation
5. No Scrap Iron Splash, Ho bolokehile haholoanyane
6. Max bevel bophara ka fihla 28mm
7. Ho sebetsa habonolo
Sebaka sa Bevel
Kopo
E sebelisoa haholo sebakeng sa lifofane, indasteri ea petrochemical, sekepe sa khatello, kaho ea likepe, metallurgy le ho laolla tšimo ea tlhahiso ea feme ea welding.
Pontšo
Sephutheloana
