What I am introducing today is a cooperation case of a certain technology company in Jiangsu. The client company mainly engages in the manufacturing of T-type equipment; Manufacturing of specialized equipment for refining and chemical production; Manufacturing of specialized equipment for environmental protection; Specialized equipment manufacturing (excluding licensed specialized equipment manufacturing); We are a professional company that produces and provides international standard steel structures. Our products are used in offshore oil platforms, power plants, industrial plants, high-rise buildings, mineral transportation equipment, and other mechanical equipment.
On site, it was learned that the diameter of the pipe that the customer needs to process is 2600mm, with a wall thickness of 29mm and an inner L-shaped bevel.
Based on the customer's situation, we recommend using the GMM-60H pipe beveling machine
Technical parameters of GMM-60H beveling machine for pipe/head edge milling machine：
|
Supply Voltage |
AC380V 50HZ |
|
Total power |
4920W |
|
Processing line speed |
0~1500mm/min adjustable (depending on material and bevel depth changes) |
|
Processing pipe diameter |
≥Φ1000mm |
|
Processing pipe wall thickness |
6~60mm |
|
Processing pipe length |
≥300mm |
|
Bevel width |
Adjustable from 0 to 90 degrees |
|
Processing bevel type |
V-shaped bevel, K-shaped bevel, J-shaped/U-shaped bevel |
|
Processing material |
Metals such as carbon steel, stainless steel, aluminum alloy, copper alloy, titanium alloy, etc |
Metals such as carbon steel, stainless steel, aluminum alloy, copper alloy, titanium alloy, etc：
Lower usage cost：One machine can handle pipelines over one meter long
Significant improvement in processing efficiency:
Using milling processing method, with a single feed rate greater than that of the transmission turning beveling machine;
The operation is simpler：
The operation of this equipment is consistent with it, and one worker can operate two types of equipment.
Lower maintenance costs in the later stage：
Adopting market standard alloy blades, both domestic and imported bevel blades are compatible.
The equipment has arrived at the site and is currently undergoing debugging：
Processing display:
Processing effect display:
Meet the on-site process requirements and deliver the machine smoothly!
Post time: Jun-13-2025