Notification–GMMA beveling machine upgrade 2019

To Whom may Concern

We “SHANGHAI TAOLE MACHINE CO.,LTD” hereby notice on the upgrade for GMMA beveling milling machine officially.  below listed with details for your better understanding and recongnition.

Start from May, 2019, All the GMMA plate beveling milling machines will be new standard. Do not hesitate to contact us if any questions. For previous parts required for replacement, We are still available to support. Pls do not worry.

1) WORM  upgrade on GMMA-60S, 60S, 60R plate beveling milling machine
It changed on the design and material type for a stronger functionto avoid any broken parts.

OLD DESIGN NEW DESIGN
https://www.bevellingmachines.com/products/plate-edge-milling-machine/ New Worn 1
https://www.bevellingmachines.com/products/plate-edge-milling-machine/ https://www.bevellingmachines.com/products/plate-edge-milling-machine/

2) Clamping Upgrade on GMMA-80A plate beveling milling machine
GMMA-80A double motor high efficiency beveling machine updated comes with a auto claming systerm by seperate motor instead of manual     clamping adjustment.  It helps alot to increase efficiency specially when operate heavy duty plates.

Below points for reference with new standard and it will updated on the operation manaul.

NOTICE ON OPERATION PICTURE SHOW
Plate Thickness Clamping Adjustment1. Turnover the button “AUTO CLAMPING” could achieve clamp and loose for work piece
2. When plate was clampt by auto but still not enough good, You can adjust through the manual wheel
Note: 1) Pls do not turn the button of “Auto clamping” during operation.
           2)Pls loosen the button when voice announce.
https://www.bevellingmachines.com/products/plate-edge-milling-machine/
Spindle speed and Feeding Speed adjustment (Panel Control)“4″  button for spindle speed adjustment 
“6″ button for feeding speed adjustment
Note: Could adjust both speed on penal control when process different materials
https://www.bevellingmachines.com/products/plate-edge-milling-machine/
Panel Control“1” Spindle Speed display during operation

“2″ Feeding Speed display during operation

“3” Spindle switch 

“4” Spindle speed button for adjust speed Ref 500-1050r/min(As per actual situation

“5” Feeding Speed button, Can change the feed direction

“6” Speed adjust buttom for adjust feeding speed  ref 0-1500mm/min;

“7” Auto clamping button  for clamp or loosen the work piece

“8” Power lock

“9” Emergency Stop

https://www.bevellingmachines.com/products/plate-edge-milling-machine/

 

Thank you for your attention.  Pls feel free to contact us with any questions or confusions. Thank you.

Sincerely

SHANGHAI TAOLE MACHINE CO.,LTD
TELL: +86 13917053771
EMAIL: sales@taole.com.cn
Web: www.bevellingmachines.com

Send your message to us:

INQUIRY NOW
  • * CAPTCHA: Please select the Cup


Post time: May-24-2019