Pipe Beveling Machine Lineup Covers Electric, Pneumatic and Quick-Set Field Weld Prep

The Pain Point: Inconsistent Pipe-End Prep in the Field

Hand-grinding pipe ends on-site is slow, uneven, and hard to repeat across a large joint count, often leaving gaps that fail root-pass welds. Field crews are replacing grinders with a cold Pipe Cold Cutting Machine approach — mechanical facing that cuts a true, repeatable bevel without heat distortion, sparks, or the oxide scale that torch-cutting leaves behind.

Three Models for Three Pipe-Prep Jobs

Electric ID-Mounted Model (80mm Class)

At 11kg with a 1200W motor, this Electric Pipe Beveling Machine expands its mandrel against the pipe’s inner diameter for self-centered, squared mounting — a true ID Mounted Pipe Beveler built for 28–76mm bore pipe with wall thickness up to 15mm, running at roughly 55 r/min for carbon steel, stainless and alloy pipe.

Picture Parameter diagram Renderings On-site photos Link
    View Product Details

Pneumatic Quick-Set Model (352mm Class)

Built for large-bore work, this Pneumatic Pipe Beveling Machine handles 150–330mm inner diameter pipe with wall thickness up to 20mm at 14 r/min. Its quick-set mandrel is designed for heavy pipeline sections in petrochemical and power-plant fit-up, where air-driven torque outperforms electric motors in wet or hazardous zones.

Picture Parameter diagram Renderings On-site photos Link
  View Product Details

Portable Pneumatic Model (80mm Class)

The lightest in the lineup at 8kg, this Portable Pipe Beveler pairs a 1200W-equivalent pneumatic drive with a 28–89mm working range and 15mm wall capacity at up to 50 r/min — sized for technicians moving between job sites who still need clean, repeatable bevels on carbon and stainless pipe.

Picture Parameter diagram Renderings On-site photos Link
        View Product Details

Specification Comparison

Spec Electric 80mm Class Pneumatic 352mm Class Portable 80mm Class
Drive Type Electric Pneumatic Pneumatic
Mounting ID mounted (expanding mandrel) ID mounted (quick-set) ID mounted, portable
Working ID Range 28–76mm 150–330mm 28–89mm
Max Wall Thickness 15mm 20mm 15mm
Rotation Speed ~55 r/min ~14 r/min ~50 r/min
Weight 11kg Heavier / large-bore 8kg
Best Fit Mid-size pipe, plant use Large-diameter pipeline Mobile field crews

Stainless and Multi-Material Compatibility

All three units function as a Stainless Steel Pipe Beveler as well as a carbon-steel and alloy-pipe tool, with interchangeable cutter heads producing V, U, J and double-bevel joints. Every model ships CE certified, giving fabrication, oil & gas, and power-plant buyers a documented safety baseline before purchase.

Frequently Asked Questions

Q1: What is the difference between an electric and a pneumatic pipe beveling machine?

A: An Electric Pipe Beveling Machine runs on standard AC power and suits indoor or plant settings, while a Pneumatic Pipe Beveling Machine runs on compressed air, making it safer for wet, confined, or explosive-atmosphere job sites.

Q2: Can a pipe beveling machine be used on stainless steel pipe?

A: Yes — used as a Stainless Steel Pipe Beveler with the correct cutter head, these machines produce clean, oxide-free bevels on stainless without the heat-affected zone left by torch cutting.

Q3: What pipe sizes can a portable pipe beveler handle?

A: Working range varies by model — compact Portable Pipe Beveler units typically cover roughly 28–89mm inner diameter, while quick-set pneumatic models scale up to 330mm and beyond for large pipeline sections.

Write your message here and send it to us
Post time: Jul-20-2026